From SoylentNews
Revision as of 21:24, 18 March 2014 by AudioGuy (talk | contribs)

Jump to: navigation, search

SystemAdministration - parent

What you need to do anything useful

You need ssh access to the machines affected, with the ability to get root privileges. Without this, there is no way to do anything useful to fix any problem with the system

You must ssh to the appropriate machine, typically to a user account, and then sudo su - to root.

(This ability must be obtained in advance, such information cannot for obvious reasons be placed on a public wiki)

Slash basic description

The slash system consists of three separate componants:

  • A Mysql database server - The database engine which holds most of the data such as articles, users, etc.
  • The Apache web server - which handles the web interface
  • The slashd daemon, which acts as a timed batch processor for various slash events and tasks.

In addition on the main server, an http caching program called varnish is running, which also must be functional, and running.

  • Varnish - an http cache.

For slash to work, all three (or four) componants must be running.

To tell if they are running, use the command 'pstree' which will show, in condensed form, the tasks that are running.

Here is what the result of the pstree command looks like on the slashcott server:

[root@slashcode init.d]# pstree
     │        └─qmgr
     │      └─sshd───sshd───bash───sudo───su───bash───pstree
[root@slashcode init.d]# 

If you get 'garbage' as the output of the pstree command, use this form instead:

[root@slashcode init.d]# pstree -A

We can see that apache is running, it shows up as httpd:


We can see that mysql is running, it shows up like this:


And we can see that slashd is running:


This one is ever so slightly easy to miss, because it is running as a child of the su command, so is not first on the list.

On the main server, Varnish must also be running:


The exact numbers (10*[httpd] etc) are not important.

This is what a properly running system should look like, on slashcott. On the main site, the database is on one machine, which must have mysql running, and and the other machine must have apache (httpd) running, varnish running, and slashd running.

Important note - at the present time, you cannot fix either system by a reboot. Apache MUST be started by hand

Primary site down

Log in to main slash machine, obtain root.

Check process list:

root@soylent-www:/etc/varnish# pstree -A

You should see tese in process list, among others:




Make sure that slashd, apache, and varnish are running, as described above.

If only varnishd is not running:

Restart varnish:

# /etc/init.d/varnish start

Check that is actually running after a few seconds by looking at the task list again. (pstree)

If varnish will not restart, you will likely need to get help from someone familiar with its configuration.

If only Apache is not running:

Start apache:

# /srv/soylentnews.org/apache/bin/apachectl start

Confirm it is running after a few seconds by looking at the process list again. (pstree)

If you get an error message about apache being unable to conect to the dastabase, you will need to ssh into the database machine and restart the database, then come back and restart apache. Apache cannot start unless it can make a database connection.

If only slashd is not running

Slashd cannot start unless Apache is running.

To start slashd:

# /etc/init.d/slash start

Confirm it is running after a few seconds by looking at the process list again. (pstree)

Note the command above ends in slash, not slashd. Slash is the name of the script, it starts the daemon known as slashd.

If slashd will not start, make sure apache and the database are running.

You may see some errors when starting slashd, at the present time this is 'normal'. Provided it starts, and seems to operate correctly, there is little that can be done about this until some code fixes are done.

If the database server is not running

You will need to ssh to the database machine.

start mysql:

# /etc/rc.d/init.d/mysqld start

Confirm it is running after a few seconds by looking at the process list again. (pstree)

If it will not start, you will need additional help.

You -may- need to restart Apache after restarting the db.

on the main machine:

# /srv/soylentnews.org/apache/bin/apachectl stop
 wait about ten seconds or check the tasklist that apache is fully stopped
# /srv/soylentnews.org/apache/bin/apachectl start

None of the abopve work, or multiple problems

In this case it may be worth a try to bring all slash related processes down, and do a cold restart, in the proper order.

Processes are usually stopped in the reverse order they start, so to bring everything down:

# /etc/init.d/slash stop
# /srv/soylentnews.org/apache/bin/apachectl stop
# /etc/init.d/varnish stop
# /etc/rc.d/init.d/mysqld stop

And then to bring them all back up:

# /etc/rc.d/init.d/mysqld start
# /etc/init.d/varnish start
# /srv/soylentnews.org/apache/bin/apachectl start
# /etc/init.d/slash start

If none of this works, you will need help from the assigned sysadmin for the machine.

Slashcott Development site down